How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

Loading ...

How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

loading...
  • Tomahawk 9010, 9020 allows you to store up to 4-x remote controls in memory.

    To program the alarm keychain Tomahawk 9010, 9020 you need:

    1. switch off the ignition;

    2. by clicking on the "quot; Overridequot; 7 times;

    3. turn on the ignition and hear 7 signals "CHIRPs"; sirens, which will confirm the input to the programming keychain;

    4. then release the "quot; Overridequot ;;

    5. push and hold the buttons with the image of the trunk and siren, to the sound quot; CHIRPy "; sirens, it will be an alert that the new key chain is memorized.

    The signaling instructions are here.

  • In order to correctly configure Tomahawk signaling pens from the 9010 and 9020 series, you need to carefully look at the display screen. Active functions will be highlighted and here's their decoding:

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    The keychain has three buttons on the side and two on the front. They and we will switch different functions.

    To properly configure the keychain, determine in which mode the alarm will work. It can be put on silent mode. That is, after hacking the siren will not work, but you will be notified. To activate this function, press:

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Another mode that you should pay attention to is the immobilizer mode, when your car is automatically set to signaling after 30 seconds after the ignition is turned off.

    As for me, these are the main points to which you need to pay attention. But more in detail you can find adjustment of all functions in instructions of charms Tomahawk.

  • This keychain is an excellent helper for any motorist. To program the tomahawk alarm keychain of 9010 and 9020 models, you should:

    tomahawk

    To start, turn off the ignition in the car and seven times you will need to press the OVERRIDE button. Then turn on the ignition again in the car.

    And there will be a siren, which confirms the entry into the program mode of this key fob.

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    And if this action did not happen within six seconds, it means that there was a return and everything needs to be done anew.

    machine

    In principle, all keyfob models are programmed in the same way, and here's an option for introducing the program into the 9030 model tomahawk. It's quite similar to the 9010 and 9020 models.

    screen

  • In principle, everything is not that difficult.

    Tomahawk 9010, 9020 can be stored in memory up to 4-x remote controls.

    So, in order to successfully program the alarm keychain Tomahawk 9010, 9020:

    1. first turn off the ignition;
    2. now you need to click the "quot; Overridequot; exactly 7 times;
    3. now turn on the ignition, after which the 7 signals "CHIRPs" will sound; sirens, thereby confirming the input to the programming keychain;
    4. now you should release the "; Overridequot ;;
    5. the next step is to press and hold the buttons with the image of the trunk and the siren until the sound "QUICK" appears. sirens, which means that the new key chain is stored and ready for use.

    In-principle, it's sunny. Step-by-step more detailed description can be found here.

  • In order to program these key chains, you need to follow the following steps:

    1) First turn off the ignition;

    2) quot; Overridequot; - Press this button seven times in succession;

    3) After these steps we will be able to enter directly into the programming of the keychain, turning on the ignition. After this action, seven CHIR signals will be heard;

    4) after that it will be necessary to simultaneously hold the buttons on the keychain like: a button with a picture of the trunk and a button with a siren image. Buttons udeprzhivaem to the sound of the siren.

    Sun, after this keychain is programmed.

    And here is the instruction.

  • Just turn off the ignition, then press 7 once the OVERRIDE button. Turn the ignition on. After 7 signals you need to release the button. Next, you need to press, keeping 2 immediately the buttons for closing and opening the car doors. You should definitely hear the siren signal, which will mean that memorization of the key fob has been successful. Turn the ignition off. After 6 seconds of missing commands from the keyfob, that is, you do not need to press it, the system itself will go into standby mode. The keychain programming is now complete. In total, for signaling type Tomahawk 9010, 9020 it is allowed to program up to four remote controls.

  • To program the key chains of this company is not so difficult as it seems at first glance. In order to program these key chains, you need to perform a number of the following and not complicated procedures:

    • Initially, switch on the ignition;
    • After that, exactly seven times press the button "quot; Overridequot ;;
    • Then turn on the ignition and you should hear at least seven peaks, if they were - it means that the programming was successful!
    • If, after previous procedures, you have heard exactly seven signals, then everything is fine, and release the "; Overridequot ;;
    • Next, find and for a few seconds hold the button on which the trunk is displayed, after pressing and holding, you should hear the signals if they were - this means that your key chain was memorized and everything went well, the system memorized the new manipulator, and now you have no problems, you can use your device.

    If something is not clear, then I advise you to read one more instruction, which describes the steps that I mentioned above.

    Also, to fix the material, I advise you to watch a video clip, in which everything is also shown in detail.

  • For programming and putting the car on alarm, in both cases we apply the buttons located on the charms themselves, which we will discuss in detail later, and give appropriate references to the technical instructions for use.

    Car alarm Tomahawk TZ-9010

    Keychain pager

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Equipment

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    PDF instruction.

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Detailed online TOMAHAWK TW-9010 user manual can be read by clicking on this link.

    Options:

    1. The main module.
    2. Keychain-pager with LCD display.
    3. Keychain standard type, waterproof (optional).
    4. Two-level shock sensor.
    5. Optional temperature sensor.
    6. Transceiver antenna.
    7. Siren.
    8. The "OVERRIDE" button.
    9. "Quot; Anti-hijackquot;
    10. The relay of blocking of the engine.
    11. Limit switch push-button type.
    12. Wires for connecting the main module, central lock, impact sensor, antenna, relay interlock.
    13. Leather case for key ring-pager.
    14. User manual and installation instructions.
    15. User's memo.
    16. Warranty card.
    17. Packing box.
    18. Battery AAA.
    19. Adjusting screwdriver.

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    For arming the car, in the case of 9010 , we press the lock button once. It is also possible to mute the siren sound. This is achieved by clicking on the button with a crossed out siren icon. In this mode, all information about the operation of the protection system is sent to the pager, which generates the appropriate alarm sounds, and also displays the corresponding indication on the display.

    After activating the auto-install function, the system switches itself on, after turning off the ignition and leaving the car, with the closing of all doors.

    Open the door by pressing the lock button.

    If you press the button with the image of the ignition key, the engine will automatically start, which is accompanied by a corresponding indication of the display keychain, sound signals, like a keychain and a car, as well as the inclusion of car headlights and flashing emergency lights.

    You can also mute the car remotely with a keychain, all with the same ignition key. In addition, it is possible to set the engine to warm up to a certain temperature.

    There are also daily start-up functions, remote status inquiry, vehicle search, shock sensor disconnection, driver call.

    All actions of the keychain can be viewed in detail in the programming table of the modes.

    34. Programming table

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Car alarm Tomahawk TZ-9020

    Keychain pager

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Equipment

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    PDF instruction.

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Detailed online TOMAHAWK TW-9020 user manual can be read by clicking on this link.

    Options:

    1. The main module.
    2. Keychain-pager with LCD display.
    3. Keychain standard type, waterproof (optional).
    4. Two-level shock sensor.
    5. Transceiver antenna.
    6. Siren.
    7. The "OVERRIDE" button.
    8. The relay of blocking of the engine.
    9. Limit switch push-button type.
    10. Wires for connecting the main module, central lock, impact sensor, antenna, relay interlock.
    11. Leather case for key ring-pager.
    12. User manual and installation instructions.
    13. User's memo.
    14. Warranty card.
    15. Packing box.
    16. Battery AAA.
    17. Adjusting screwdriver.

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    Signaling 9020 provides also the possibility of setting up for alarm by pressing one button from the keychain, as well as removing it from it. All buttons are signed and labeled with the appropriate icons. In addition, the possibility of quiet setting and removal is realized. You can disable both the shock sensor and the security mode sensor. It is possible to select the mode at which the car with the engine is driven. A very interesting function of safe driving, which when activated, automatically closes all doors of the cabin, and which is deactivated when any door is opened for the next ten seconds. It is also possible to remote and hourly start the engine, which is especially important in the winter. There is a function of searching for a car, and there is a panic function, where you can remotely activate the sound and light alarm. There is an anti-hacker function that is directed against the actions of intruders and the use of grabbers and scanners. All functions are controlled in accordance with the programming table for selecting the modes of operation of the keyfob.

    Noteworthy and the function of transferring the car for service, in which some functions of the security complex are blocked.

    This system refers to highly intelligent devices, and uses a sophisticated algorithm to avoid false positives.

    VI. Programming table for security functions

    But this video from 9030 basically shows you all the ease of using the programmable functions of the keychain, just do not forget to periodically change the batteries in it:

    Based on the experience of using a variety of auto alarms and their key fobs, I can say that there is nothing easier than to understand the operation of this device. The main thing do not forget to put the car on the parking brake (handbrake), as well as to move the box to a neutral position, and never forget the keys and the key chain in the car, but better have two sets, and always keep the key chain with you, and one more will not hurt keep houses, and then you will never need autopsy services. Well, about the attackers must always remember, and do not relax. Watch where you leave the car, use special safety features, as well as not be lazy, and always lock the steering wheel.

    Good luck on the roads!)

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

    How to program a tomahawk signaling keychain (tomahawk) 9010, 9020?

Print Friendly, PDF & Email
loading...

Add a comment

Your e-mail will not be published. Required fields are marked *