How to program, configure the Starline keyring a9, a91, b6?

How to program, configure the Starline keyring a9, a91, b6?

  • There is an asterisk * on the side of StarLine keychain. Pressing it toggles the function of the keyfob.

    To adjust the time on the key fob, you need to pin "; quot; and wait for two beeps. And you can switch the hours and minutes using the "locks"; (the button for setting the alarm and removing the alarm).

    Note, to change the watch on the key fob, it is enough to enter the time change mode. To change the minutes, you need to press again; quot; * quot ;.

    On the keyfob, you can turn off the sound of the siren. To do this, you will also need a quot; asterisk ;.

    More clearly see in the video:

  • When installing the Starline alarm system and others you had to set up your key chains.

    If the settings are lost or you change the alarm keychain - contact the Starline service center where they can help you with your problem.

    If you do not have the opportunity to visit the service center - you can try to program yourself, set up the alarm keychain based on this video:

  • First, the first button of the keychain is programmed, it is needed to quickly turn on and off the armed mode.

    How to program, configure the Starline keyring a9, a91, b6?

    Then the second button is programmed, it allows to specify the data about the car.

    How to program, configure the Starline keyring a9, a91, b6?

    You also need to set the clock.

    How to program, configure the Starline keyring a9, a91, b6?

    And, if necessary, an alarm clock.

    How to program, configure the Starline keyring a9, a91, b6?

  • To program the key chain alarm system Starline b6.

    It is worthwhile to know that in the alarm memory it is permissible to record the maximum number of remote controls - this is 4. The codes are recorded when the security mode is disabled in this order:

    How to program, configure the Starline keyring a9, a91, b6?

    To program the key chain alarm Starline A9, as well as up to 4-x key fobs and with the guard off.

    How to program, configure the Starline keyring a9, a91, b6?

    But programming ** keychain alarm A91 ** look at the video.

  • To program and configure the alarm stick, with the installation of basic security and service functions, use the side buttons located on the end of the keychain. Let's take a closer look at all three security complexes.

    Car Alarm Starline a9

    StarLine A9 key ring

    How to program, configure the Starline keyring a9, a91, b6?

    Options:

    central alarm unit

    1 keychain with two-way communication with LCD

    1 keychain without two-way communication

    cover for key fob with LCD

    2-level shock sensor

    transceiver

    bonnet button

    light-emitting diode

    service button

    anti-plague button

    wire set

    engine temperature sensor

    instruction

    user's memo

    Detailed online STARLINE TWAGE A9 Instructions for use and installation, you can click on this link

    How to program, configure the Starline keyring a9, a91, b6?

    1 button

    Programmable command (0,5 sec)

    Remote start and stop the engine (3 sec)

    Arming when the engine is running (3 sec)

    2 button

    The command corresponding to the current position of the cursor on the display keychain (0,5 sec)

    Unlocking the trunk (3 sec)

    3 button

    Controlling the position of the cursor on the display keychain (0,5 sec)

    Interrupt alarms keychain (0,5 seconds)

    Enable or disable the clock, alarm, timer, power saving mode (3 sec)

    Programming the 1 button (6 sec)

    Buttons 1 + 2

    Search mode (0,5 sec)

    Panic mode (3 sec)

    Buttons 3 + 1

    Selecting the alert mode keychain (0,5 sec)

    Buttons 3 + 2

    Quick setting of the keychain timer (0,5 sec)

    How to program, configure the Starline keyring a9, a91, b6?

    How to program, configure the Starline keyring a9, a91, b6?

    How to program, configure the Starline keyring a9, a91, b6?

    Car Alarm Starline a91

    StarLine A91 Dialog

    How to program, configure the Starline keyring a9, a91, b6?

    Options:

    central alarm unit

    1 keychain with two-way communication with LCD

    1 keychain with two-way communication without LCD

    cover for key fob with LCD

    2-level shock sensor

    transceiver

    bonnet button

    light-emitting diode

    service button

    wire set

    engine temperature sensor

    installation instructions

    user's manual

    user's memo

    Detailed STARLINE TWAGE A91 Operating and installation manual can be downloaded by clicking on this link

    Read more about STARLINE TWAGE A91 online at this link, click and boldly go to the description and instructions, photos and videos, all in great detail.

    Specifications:

    central unit 1

    main keychain LCD display, two-way communication

    extra keychain without display, one-way communication

    shock sensor 2-level

    temperature sensor is, external and built-in

    transmit / receive module

    mounting kit standard

    Security alarm functions

    two-way communication between key fob and car is

    Number of individual security zones 9

    passive immobilizer mode is

    personal emergency shutdown PIN is

    step-by-step disarming

    car protection with the engine running, there is, without a key in the ignition lock

    engine lock attaching

    motor lock digital relay option

    quot; silent mode of protection

    Service alarm functions

    outputs of activation of door activators are, power

    entrance to the luggage compartment lock is, low-current

    number of additional channels 4

    the call of the owner to the car is

    noiseless arming / disarming

    quot; comfortquot; there is

    Radio channel and keychain functions

    maximum radius of the transmission / reception 800 / 1800 meters

    control of communication channel is

    indication of the cause of the alarm is

    vibro mode in the keychain is

    arming and disarming by different buttons

    Autostart and turbo timer

    remote engine start

    automatic starting of the engine after a specified interval or according to a given time

    temperature automatic start

    quot mode; turbo timer; there is.

    How to program, configure the Starline keyring a9, a91, b6?

    Car Alarm Starline b6

    StarLine keychain B6

    How to program, configure the Starline keyring a9, a91, b6?

    Options:

    central alarm unit

    1 keychain with two-way communication with LCD

    1 keychain without two-way communication

    cover for key fob with LCD

    2-level shock sensor

    transceiver

    bonnet button

    light-emitting diode

    service button

    wire set

    instruction

    user's memo

    Detailed online STARLINE TWAGE b6 Instructions for use and installation, you can click on this link.

    How to program, configure the Starline keyring a9, a91, b6?

    Purpose of the remote control buttons

    1 button

    Activation of armed mode with sound confirmation (single press)

    Activation of the armed mode without sound confirmation (consecutive pressing)

    Disable / enable impact sensor by level (double-tap)

    Locking the door locks with the ignition on (one-touch)

    2 button

    Deactivating the armed mode with sound confirmation (single press)

    Deactivating the armed mode without sound confirmation (successive press)

    Disable / enable ext. sensor by level (double tap)

    Unlocking the door locks with the ignition on (single press)

    Turn off anti-plague mode (two single presses)

    Interruption of alarms (single push)

    3 button

    Monitoring the alarm and temperature in the passenger compartment (single press)

    Enable search mode (double-tap)

    Activation of an additional channel 3 (sequential pressing)

    Activation of the cursor selection of the following functions: anti-plague mode, 2-stepping off engine locks mode, silent mode, service mode, turbo timer mode, automatic arming mode, immobilizer mode (long press)

    Enabling the current time setting mode, alarm indication and countdown timer (long press)

    Buttons 1 + 2 at the same time

    Enabling panic mode (long press with the ignition off)

    Enabling the anti-plague mode (long press with the ignition on)

    1 + 3 button at the same time

    Enabling the key lock keychain (single push)

    Buttons 2 + 3 at the same time

    Turn off the keylock of the keyfob (single press)

    Buttons 1 and 3 sequentially

    Arming with the engine running

    Buttons 3 and 1 sequentially

    Activating an additional 1 channel

    Buttons 3 and 2 sequentially

    Activating an additional 2 channel

    How to program, configure the Starline keyring a9, a91, b6?

    Conclusions:

    Having considered all three types of signaling, we can now say that it is quite simple to use such an alarm, thanks to the three-button version of the keychain. In other words, our brain is not overloaded with multitasking, which usually occurs with a large number of buttons. Here everything is simple.

Print Friendly, PDF & Email
Loading ...

Add a comment

Your e-mail will not be published. Required fields are marked *