It seems to me that it is possible to draw a machine with the help of schemes and tips, and even easier to draw from a finished coloring book, for example. I think that it's best to draw by schemes to convey accuracy to our drawing.
For example, you can draw a machine in the "profile", then only part of the machine will be visible - side, two wheels, windows. You can draw a machine from above. Then we depict the roof, the hood, but do not see the wheels, windows and doors.
Painting is best, starting with the wheels - see below the drawing scheme for the stages. Immediately draw a couple of circles on a piece of paper. Then paint this shape of the car as you want. It can be a sports car, a passenger car, such as "Lada", or a small truck.
In sports cars make the body a little more elongated, the landing should be low. Only the doors and the glass in them are visible on the side. But you can "turn"; car in different angles.
These options are complex. For a child, you can suggest a machine based on a rectangle, which you need to divide into parts. In them it's easier to draw a car in parts - wheels, doors and windows.
The easiest option is to draw a simple typewriter in the profile. There is nothing complicated and to cope with this and the child is not gifted with a talent for drawing. See for yourself a few examples:
But to draw a "volumetric"; the car is more difficult - you need to observe the proportions, the smoothness of the lines, the details. Here are some step-by-step lessons.
I propose a variant of the coolest car, which can not be compared to anything else. The little boys love everything beautiful, especially the steep cars. Therefore, it is not worth choosing the simplest option, but it's worth to focus on complex, beautiful models.
Erase excess lines and voila!
Machines, they are different. Let's draw something like this. Let's start with the basic rectangular frame. Remember the perspective.
Begin to enter there our super car.
About the wheels do not forget.
You can add volume.
I'll try to give examples of not complicated schemes of stage-by-stage drawing of the machine. Prepare paper, eraser, pencil. In the end, at your discretion, you can certainly make a drawing in color, and you can leave a completely penciled drawing, and shade with a simple pencil. So, let's start drawing. For example, here is a car: we draw a rectangle first, roughly indicating the places where the caps will be. Then we cut off the corners - where there will be a windshield, and a little behind. We begin to draw the cals. Well, and so on, as shown in the diagram, we move on the steps.
Next - there is one more scheme, this time we are drawing an SUV. The scheme is the same, the pattern begins with a rectangle, then an integral part of any car - the cot. And then, as shown in the steps, just repeat all the actions. Good luck in drawing!
Draw a car to whom? After all 4 summer child can just draw a rectangle and two circles and say that this is a machine. A child older can already picture something like this:
At first, an arbitrarily stretched rectangle is drawn and, since the machine is open-topped, there is no need to represent the side and rear windows-enough forehead-frontal. A place is chosen for the wheels. The front and rear bumper is shown. The front and rear lights are shown, It is important to divide into two parts, one of which will be a lateral signal.
In addition, there are still a lot of interesting schemes and lessons. Here are just some of them:
The most simple car can be drawn in four simple steps:
It turned out quite a nice machine.
And here it is possible to draw a truck (eight stages will be required):
To all the pleasant process of drawing.
I suggest for drawing one with easy variants of drawing of the car.
Prepare a sheet of paper, an elastic band, a straightedge pencil simple and colored pencils.
Step-by-step scheme-recommendation of drawing the machine in five stages. The color of the car can be completely different, it's from your inspiration.
Good luck in your work and inspiration!
To draw a machine step by step, we need a pencil, an elastic band and for models a more complicated line. First you need to study the technique of drawing on simple models of cars and gradually move on to more complex ones.
Here is the model simpler:
Rђ RІRѕS, more difficult:
More models can be found on this site. Here you can enlarge the image, print it and use it as a coloring.
Draw a rectangle. Then trapeze over it. It turns out the body of the future car. Next, we need to draw tires and headlights. A simple drawing can be suggested for a child. That's what I found.
Immediately draw the windows, as in the drawing, of the glass.
Erase the excess rubber band, then you can paint with paint or felt-tip pens.