How to knit pants, jeans from below at home?
You can narrow your pants only to the knee area. And do not strongly zuzhivat pants, as they will gather and at the knee will be concave. There are two seams: a step and a side. It is not necessary zaživat jeans at both seams. The main thing in this business is to correctly calculate how much excess tissue needs to be removed.
Please note that jeans should not ideally fit your foot, because you still have to walk, squat, run, etc. 1-2 centimeter leave just in case.
To cut your pants, you need to sew the extra part of the sewing machine to the seam. Thus, apparently the old seam remains, but it will become slightly thicker, and the width of the trousers will decrease.
As it seems to me, without scissors and circumcision of excess fabric here do not be covered.
First, cut the leg to the desired length on both sides (to the height where zaugivanie begin), then trim off excess and on the machine to stitch.
Not sure of their abilities - take it to the master.
You can do this: put the pants on inside out and see how much they need to be closed, secure with pins in these places at the place of the future seam, draw a shallow line, cut off excess part of the fabric, sew first manually and then stitch it.
If you want to make jeans on your own at home, or in other words, cut it, I suggest that you familiarize yourself with the following simple actions.
In this issue, the main thing is not to overdo it and not to spoil your jeans.
The way I want to offer is quite simple, consists of three stages.
- Pull the pants inside out and draw chalk borders, indicating how much we will cut pants, do not forget to leave 1-1.5 cm "for stock". As an option - put on top of other pants (of suitable size) and outline the outline, using them as a template. The second option is generally a win-win.
- We sew on the sewing machine, I use the largest (from possible) length of the stitch. What for? In case we are a little mistaken in size, it will be easy to dissolve and correct.
- We dress pants and see how they sit on us, we must necessarily walk around, poprised. If all is well, you can flush it completely.
The video shows all the necessary sequence of actions necessary to zauzi jeans. First, just lower the bottom seam, only the inner part of the trousers, which will be reinfaced again.
Trousers-trousers, and with jeans a bit more complicated, usually in them either external, or the step-seam is stitched by a double stitch. In this case, you need to turn the hem on the bottom, rip off the double finishing line (and rasporot above so you can seamlessly seam the seam from the inside ) From the underside of the chalk draw a line of a new seam (keep in mind that the back of the trousers should be wider than the front somewhere at 2 cm). Then stitch it, cut off excess fabric, sweep it, press it and again create a double stitch at the top of the seam, trying to pick up the thread in the tone. A little secret: as a rule, jeans are stitched with a thick contrasting thread and that your line does not differ much from the factory one, then putting the reel with suitable ones thread, unwind from the spool long enough "tail" thread, fold it up twice and pull in the needle doubled thread. So, too. The needle must also be thick (100-110). In this case, your line will look more noticeable and embossed . By the way, do not forget that the seam of the hem underneath is rather thick, especially in the places of the lateral seams. So if you are not sure that your machine will master such a thickness, then it's better not to start. Otherwise, risk at best get ugly blanks on the line, and at worst, just break the needle. In any case, in particularly thick areas, scroll the wheel by hand, just pulling the tissue with your hand from yourself. without a certain skill here, of course, not to do, especially it concerns branded jeans of high-quality denim.
I see only one solution to your problem, to change. But if your hands grow a little from where you need it, for such an operation, you can carry it to the atelier. And if you do not feel sorry for yourself, you can cut it off, sew a little edge and make beautiful breeches, then fly your fantasy, you want to sew lace on your pockets, or make a brilliant vstavochku, in general create)
Zauzit trousers, jeans from below at home is quite real and not too difficult.
In order to zauzit jeans you need to iron them properly and turn them to the wrong side:
Now measure how much you want to cut, but do not forget to leave the fabric in reserve for the seams and the gate. After you have decided on the amount of zaugivaniya, draw a soap or chalk line on the deferred points:
1) It is necessary to measure the narrowest part of the foot - and make a comfortable size for you + stock;
2) Next, measure the middle part between the knee and ankle - also lay off the comfort distance + stock
3) And measure the top point from which you will begin to zazhivanie.
These three points mark and connect under the ruler. Then, you get it. Trim excess and spend on the typewriter.
In this case, the bottom of the pants will have to be dissolved and re-hemmed.
And here is another kind of master class:
It is quite easy to cut already existing trousers. To do this, you need to cut the bottom of the trousers, then turn out the trousers on the wrong side and outline how much and from where, in height, you will suture. Make a mark, dress and see if the option suits you. If everything suits is sewed on the typewriter on the marking, and we sew the bottom.